Constitutiveequation相关论文
为解决Inconel 617合金的高温加工问题,对锻造Inconel 617合金的高温热变形行为进行了研究.利用Gleeble-3500热模拟试验机研究了In......
During the direct chill (DC) casting process, primary cooling from the mold and bottom block, and secondary cooling from......
Using Gleeble-3500 thermal simulator, the high temperature plastic deformation behavior and microstructure evolution of ......
...
Hot processing behavior of an ultra-high-strength Fe-Ni-Co-based maraging steel was studied in temperature range of 900-......
This study presented a quantitative investigation of deformation behavior and dynamic recrystallization of low-alloy hig......
Hot Deformation Behavior and Processing Maps of a High Al-low Si Transformation-Induced Plasticity S
Hot deformation behavior of a high Al-low Si transformation-induced plasticity (TRIP) steel was studied by an MMS-300 th......
The microstructure evolution and formability of Ti-10V-2Fe-3Al alloy related to the initial microstructures and processi......
Hot compression tests of low carbon steel were carried out on Gleeble-3500 system in the temperature range from 750 to 9......
The thermal-mechanical properties of WHT1300HF high strength steel were tested by isothermal uniaxial tensile methodatva......
Hot deformation behavior and processing maps of alumina-forming austenitic steels with different nic
Austenitic stainless steels are important structural materials in both fusion and fission reactors.Alumina-forming auste......
The deformation behaviors of China Low Activation Martensitic(CLAM)steel were investigated by the thermal simulation com......
The flow stress,microstructure and softening mechanism of NM550 wear-resistant steel were investigated via hot compressi......
The Constitutive Model and Processing Map for in-situ 5wt% TiB2 Reinforced 7050 Al Alloy Matrix Comp
This study investigated the constitutive flow behavior and hot workability of in-situ 5wt% TiB2 reinforced 7050 Al alloy......
Hot deformation behavior and microstructure evolution of an Fe-30Cr-2Mo ultra-pure super ferritic st
The hot deformation behavior and microstructure evolution of an Fe-30Cr-2Mo ultra-pure super ferritic stainless steel we......
为了优化TA32钛合金薄壁件的热成形工艺,对其热流动行为、显微组织演变和断口形貌进行研究。根据实验数据建立一套基于合金显微组......
A short process of Inconel 625 alloy tube was developed to solve the problems of the traditional extrusion process,and p......
通过对铸态Mg-3Sn-1Mn-1La合金在变形温度为200～450℃、应变速率为0.001～1.0s-1条件下进行热压缩实验,研究了其热变形行为和微观组织......
Mechanical problems of superplastic fill-forming bulge solved by one-dimensional tensile and two-dim
Because of the strong structural sensitivity of superplasticity, the deformation rule must be affected by stress-state. ......
对以ＴＡＴＢ为主的钝感炸药ＪＢ－９０１４进行了２５ｍｍ和５０ｍｍ两种装药直径的圆筒试验，测试了ＴＵ１圆筒在爆轰产物驱动下膨胀过程Ｒ（ｔ）关系。对圆筒试验进行了综合分析和二维数......
从不可逆热学过程的一般本构形式出发，具体讨论了弹塑性损伤和蠕变损伤的本构文科工由增广变分泛函给出了相应的损伤变分泛函有限元......
